Description Used in various automotive interiors, plastics, paints, coatings, electronic meters, textiles, printing and dyeing, dyes, decorative materials, wood floors, safety helmets, leather, petrochemicals, rubber, and other materials to perform artificial aging tests and light resistance, Colorfastness to weather, composite colorfastness to light and perspiration, etc. By setting the xenon lamp irradiation energy, temperature, humidity, spray, and xenon lamp light and dark alternate conditions in the test chamber, it provides the simulated natural environment required by the standard to test the material's performance changes such as fading, aging, softening, hardening, and cracking.
Test Standards: GB/T16422.2-2014 "Plastic Laboratory Light Source Exposure"
Features: 1. Exposure method: flat tray, three-dimensional space can test three-dimensional samples; 2. Light source system: use special long arc xenon lamp, high-intensity light, 2.5KW professional air-cooled xenon arc lamp; 3. Special filter components are used to make the filtered spectrum fully meet the requirements of GB, FZ, AATCC, ISO, JIS, and other standards; 4. Irradiance control: digital setting of light intensity, real-time monitoring, automatic adjustment, meeting the stability requirements of different standards for test light sources. 5. Temperature control: Black-Board Thermometer (BPT) or Black Mark Thermometer (BST), air temperature (CHT), and the sample are detected at the same station, which truly reflects the test condition of the sample. The measured data is processed by the CPU in numbers and charts. , Curve and other methods are displayed on the color screen without stopping the machine for observation. 6. Humidity control: PTC high-temperature dual humidification system, the original humidification is made of SUS316 material and durable, the humidification tube is protected from over-temperature and dry-burning, and the test humidity is accurate and stable; 7. Sprinkler system: When spraying is needed in the test, the high-pressure spray umbrella-shaped rain mist, which simulates the effect of natural rain, the rain volume is 0.4L/min. 8. Data output method: The instrument is equipped with a USB port, and the test data can be directly exported by a U disk according to the EXL form file and read on the computer; 9. Data display mode: 7-inch review color touch screen display and control, Chinese and English operation, multiple test monitoring modes (number, curve, table), convenient control, intuitive and clear; 10. Standard setting: self-set fixed value operation or program operation. 11. Monitoring interface(Have Chinese and English): friendly monitoring interface, operating curve (as shown in the figure):
1. Model: UP-6117 2. Studio size: 1000×1000×1000 (D×W×H)mm 3. Dimensions about 2180mm×2190mm×2690mm (D×W×H) 4. Lamp power: 2.5KW (air-cooled long arc xenon lamp) 5. Lamp life: 1000 hours of lighting 6. Energy control point: @340nm 7. Irradiation intensity: 0.25~0.35W/m2@340 8. Irradiation adjustment: built-in solar eye, closed-loop irradiation monitoring PID automatic adjustment 9. Filters: special glass filter combinations to simulate different environments 10. Air temperature range: 35~80ºC (adjustable) 11. Blackboard temperature range: 35~100ºC (adjustable) 12. Temperature fluctuation: ±0.5ºC 13. Temperature uniformity: ±3ºC 14. Humidity range: during the light cycle: 30~75%R.H; during the dark cycle: 45~95%R.H%; 15. Average humidity: ±5%R.H 16. Sample tray: flat plate type 725mm×490mm 17. Sample capacity: standard finished parts or three-dimensional space test parts can be measured 18. Dark light cycle: 0~9999H cycle setting 19. Rain cycle: 0~9999H cycle setting 20. Spray method: spray on the sample surface 21. Light tube: 1 pcs
){kind=link}